Your LuvFido bed has been vacuum sealed and will be wrapped in two layers of plastic. Follow these instructions and allow 24-48 hours for your bed to reach its full size.
Carefully cut the plastic on one of the ends.
Carefully cut the first layer to the other end making sure not to puncture the other layer of plastic or the bed itself.
The second layer of plastic will be taped in multiple places.
Cut JUST the tape to break it free from holding the bed in a rolled position.
Unroll the bed still in the vacuumed sealed plastic.
Cut the plastic at one end of the bed at least one inch OUTSIDE the edges of the bed.
Pull the bed out of the plastic.
Unzip the bed cover to get to the waterproof liner.
The liner will not be fully zipped. Fully zip the liner.
Fully zip the bed cover. Thoroughly scrunch the bed to break up the compressed foam.
Unzip the bed cover and the waterproof liner to allow air to reach the foam. Do not use the bed while the liner is unzipped as pieces of the foam may spill out. We recommend placing the bed somewhere “safe” from Fido for at least 12 hours before using the bed. For maximum comfiness, allow 24-48 hours before use.